BSXXX - BUTYL METHACRYLATE/ISOBUTYL METHACRYLATE, 209

  • MSDS: BSXXX
  • Manufacturer: SCIENTIFIC POLYMER PRODUCTS INC
  • Product Name: BUTYL METHACRYLATE/ISOBUTYL METHACRYLATE, 209
  • National Stock Number: 6810-00N042673
Product Identification

Product ID:BUTYL METHACRYLATE/ISOBUTYL METHACRYLATE, 209
MSDS Date:10/01/1991
FSC:6810
NIIN:00N042673
MSDS Number: BSXXX

Responsible Party
SCIENTIFIC POLYMER PRODUCTS INC
6265 DEAN PARKWAY
ONTARIO, NY 14519
US

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MWG0

Contractor
SCIENTIFIC POLYMER PRODUCTS INC
ONTARIO, NY 14519 US

Telephone: 716-265-0413

Cage: 0MWG0

Ingredients

BUTYL METHACRYLATE/ISOBUTYL METHACRYLATE

CAS: 9011-53-4

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE LISTED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NUISANCE PARTICULATES MAY CAUSE
IRRITATION TO EYES, SKIN AND RESPIRATORY TRACT. NO OTHER HUMAN
HEALTH EFFECTS ARE KNOWN TO EXIST.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE LISTED BY MANUFACTURER.

First Aid

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MEDICAL
ASSISTANCE. INHALATION: REMOVE FROM EXPOSURE. IF BREATHING STOPS,
BEGIN MOUTH TO MOUTH. EYES: FLUSH WITH WATER FOR AT LEAST 15
MINUTES. SKIN: WASH AF FECTED AREA WITH SOAP AND WATER. REMOVEDIRTY
CLOTHING. INGESTION: CALL MD IMMEDIATELY .

Fire Fighting

Flash Point:580F,304C
Extinguishing Media:CARBON DIOXIDE, CHEMICAL FOAM, WATER FOG, DRY
CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:SWEEP UP AND PLACE IN CONTAINER FOR DISPOSAL.
POLYMER PARTICLES PRESENT A SLIPPING HAZARD WHEN SPILLED.
Neutralizing Agent:NONE LISTED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS DRY AND TIGHTLY CLOSED
TO AVOID MOISTURE ABSORPTION AND CONTAMINATION.
Other Precautions:NONE LISTED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:IF NEEDED. WEAR NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:NOT APPLICABLE.
Work Hygienic Practices:GOOD HYGIENE SHOULD BE STRICTLY FOLLOWED.
Supplemental Safety and Health
NONE LISTED BY MANUFACTURER.

Chemical Properties

HCC:N1
Spec Gravity:1.09
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:SMALL ROUND BEADS, ODORLESS.
Percent Volatiles by Volume:<1.0%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEATING ABOVE 570F.
Hazardous Decomposition Products:NONE KNOWN.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE, AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.